EPS4Z Column Bases

www.strongtie.com

EPS4Z Column Bases

The EPS4Z provides a light-duty connector for attachment of posts to concrete.

Material: 14 gauge

Finish: ZMAX® coating; see Corrosion Information.

Installation:

Use all specified fasteners. See General Notes.
Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
Embed into wet concrete up to the embedment line. A 1" minimum side cover is required to obtain the full load.
Posts shall be preservative-treated wood to meet building code requirements.

roll over images below to see larger image

Loads may not be increased for short-term loading.
Download capacity is based on either the post design or concrete design calculated per code.
Structural composite lumber columns have sides that show either the wide face or the edges of the lumber strands/veners. Values in the table reflect installation into the wide face.
Testing to new ICC-ES acceptance criteria to be completed in 2009. Reference this web site for the latest loads and information.
NAILS: 10dx1 1/2= 0.148' dia. x 1 1/2" long. See other nail sizes and information.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
EPS4Z	No code listing: Please contact us for test data.

topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
EPS4Z	EPS4Z: DWG \| DXF EPS4Z front view: DWG \| DXF EPS4Z left view: DWG \| DXF EPS4Z right view: DWG \| DXF EPS4Z top view: DWG \| DXF	EPS4Z: DWG \| DXF

Order free catalogs by mail

Post/Column Bases (Wood Construction)

Printed from