LGUM/HGUM High Capacity Beam/Girder Hangers for Concrete/Masonry

High-capacity beam or girder hangers for concrete or masonry applications. Installation is made easier using Simpson Strong-Tie® Strong-Drive® screws (SDS) (provided) into the wood member and Titen HD® (provided) anchors into the masonry.

Material: See table

Finish: Galvanized

Installation:

Use all specified fasteners (included).
Attach hanger to a concrete or grouted CMU wall using Titen HD anchor. Note the following:
- Drill holes using drill bits equal in diameter to the specified Titen HD anchor.
- Holes shall be drilled 1/2" deeper than the specified Titen HD length (i.e. 4 1/2" for a 4" long Titen HD)
- Caution: Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with the base material and will reduce the anchor’s load capacity.
Titen HD is not recommended for exposed exterior applications.
Provide moisture barrier between beam and wall per jurisdictional requirements.

Options: For HGUM only - Other seat widths available. Order as "X" version.

roll over images below to see larger image


LGUM		HGUM



Typical LGUM Installation		Typical HGUM Installation

Uplift loads have been increased 60% for wind or earthquake duration. No further increase is allowed.
Minimum f'_m = 1500 psi and f'_c = 2500 psi.
LGUM must be installed on minimum 6" thick wall and HGUM on minimum 8" thick wall. (Nominal values for CMU)
Titen HD anchors may be installed into the head or bed joints.
Products shall be installed such that the Titen HD anchors are not exposed to exterior applications.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
HGUM	See specific model numbers for code listings.
HGUM5.25	No code listing. Please contact us for test data.
HGUM5.50	No code listing. Please contact us for test data.
HGUM7.00	No code listing. Please contact us for test data.
HGUM7.25	No code listing. Please contact us for test data.
HGUM9.00	No code listing. Please contact us for test data.
LGUM	See specific model numbers for code listings.
LGUM210-2	No code listing. Please contact us for test data.
LGUM210-3	No code listing. Please contact us for test data.
LGUM210-4	No code listing. Please contact us for test data.
LGUM26-2	No code listing. Please contact us for test data.
LGUM26-3	No code listing. Please contact us for test data.
LGUM26-4	No code listing. Please contact us for test data.
LGUM28-2	No code listing. Please contact us for test data.
LGUM28-3	No code listing. Please contact us for test data.
LGUM28-4	No code listing. Please contact us for test data.
LGUM410	No code listing. Please contact us for test data.
LGUM46	No code listing. Please contact us for test data.
LGUM48	No code listing. Please contact us for test data.

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
HGUM	HGUM: DWG \| DXF HGUM front view: DWG \| DXF HGUM left view: DWG \| DXF HGUM right view: DWG \| DXF	None for this model
HGUM5.25	None for this model	None for this model
HGUM5.50	None for this model	None for this model
HGUM7.00	None for this model	None for this model
HGUM7.25	None for this model	None for this model
HGUM9.00	None for this model	None for this model
LGUM	None for this model	None for this model
LGUM210-2	None for this model	None for this model
LGUM210-3	None for this model	None for this model
LGUM210-4	None for this model	None for this model
LGUM26-2	None for this model	None for this model
LGUM26-3	None for this model	None for this model
LGUM26-4	None for this model	None for this model
LGUM28-2	None for this model	None for this model
LGUM28-3	None for this model	None for this model
LGUM28-4	None for this model	None for this model
LGUM410	LGUM410: DWG \| DXF LGUM410 front view: DWG \| DXF LGUM410 left view: DWG \| DXF LGUM410 right view: DWG \| DXF LGUM410 top view: DWG \| DXF	None for this model
LGUM46	LGUM46: DWG \| DXF LGUM46 front view: DWG \| DXF LGUM46 left view: DWG \| DXF LGUM46 right view: DWG \| DXF LGUM46 top view: DWG \| DXF	None for this model
LGUM48	LGUM48: DWG \| DXF LGUM48 front view: DWG \| DXF LGUM48 left view: DWG \| DXF LGUM48 right view: DWG \| DXF LGUM48 top view: DWG \| DXF	None for this model