LSU/LSSU Adjustable Light Slopeable/Skewable U Hangers

The LSU and LSSU series of hangers may be sloped and skewed in the field, offering a versatile solution for attaching joists and rafters. These hangers may be sloped up or down and skewed left or right, up to 45°.

Material: See table.

Finish: Galvanized. Some products available in ZMAX® coating; see Corrosion Information.

Installation:

Use all specified fasteners. See General Notes.
Attach the sloped joist at both ends so that the horizontal force developed by the slope is fully supported by the supporting members.
See an installation video on this product.

roll over images below to see larger image


LSU26	LSSU410 (LSSU210-2 similar)	LSSU28

top LSU and LSSU Installation Sequence
(For Skewed or Sloped/Skewed Applications)

roll over images below to see larger image


Step 1 Nail hanger to slope-cut carried member, installing seat nail first. No bevel necessary for skewed installation. Install joist nails at 45° angle.	Step 2 Skew flange from 0-45°. Bend other flange back along centerline of slots. Bend one time only.	Step 3 Attach hanger to the carrying member, acute angle side first (see footnote 4). Install nails at an angle.

Roof loads are 125% of floor loads unless limited by other criteria.
Uplift loads include a 60% increase for wind or earthquake loading with no further increase is allowed; reduce when other loads govern.
Truss chord cross-grain tension may limit allowable loads. Refer to Technical Bulletins T-ANSITPISPF, T-ANSITPISP and T-ANSITPIDF for allowable loads that consider ANSI/TPI 1-2007 wood member design criteria.
For skewed LSSU hangers, the inner most face fasteners on the acute angle side are not installed.
10dx1 1/2" nails may not be used for face nails on skewed or sloped and skewed LSU and LSSU hangers.
NAILS: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long.
See other nail sizes and information.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
LSSU	See specific model numbers for code listings.
LSSU2.1	No code listing: Please contact us for test data.
LSSU210		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSSU210-2		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSSU28		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSSU410		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSSUH310	No code listing: Please contact us for test data.
LSU	See specific model numbers for code listings.
LSU26		ESR-2551 / ESR-2523 *	RR25804	FL10447
LSU26Z		ESR-2551 / ESR-2523 *		FL10447

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
LSSU	None for this model	LSSU: DWG \| DXF LSSU Installation 1: DWG \| DXF LSSU Installation 2: DWG \| DXF LSSU Installation 3: DWG \| DXF Rotation Resistance: DWG \| DXF
LSSU2.1	LSSU2.1: DWG \| DXF LSSU2.1 front view: DWG \| DXF LSSU2.1 left view: DWG \| DXF LSSU2.1 right view: DWG \| DXF	None for this model
LSSU210	LSSU210: DWG \| DXF LSSU210 front view: DWG \| DXF LSSU210 left view: DWG \| DXF LSSU210 right view: DWG \| DXF LSSU210 top view: DWG \| DXF	LSSU210: DWG \| DXF
LSSU210-2	LSSU210-2: DWG \| DXF LSSU210-2 front view: DWG \| DXF LSSU210-2 left view: DWG \| DXF LSSU210-2 right view: DWG \| DXF	None for this model
LSSU28	LSSU28: DWG \| DXF LSSU28 front view: DWG \| DXF LSSU28 left view: DWG \| DXF LSSU28 right view: DWG \| DXF	None for this model
LSSU410	LSSU410: DWG \| DXF LSSU410 front view: DWG \| DXF LSSU410 left view: DWG \| DXF LSSU410 right view: DWG \| DXF	None for this model
LSSUH310	LSSUH310: DWG \| DXF LSSUH310 front view: DWG \| DXF LSSUH310 left view: DWG \| DXF LSSUH310 right view: DWG \| DXF	None for this model
LSU	None for this model	None for this model
LSU26	LSU26: DWG \| DXF LSU26 front view: DWG \| DXF LSU26 left view: DWG \| DXF LSU26 right view: DWG \| DXF LSU26 top view: DWG \| DXF	High Wind-Resistant Construction D109: Hanger Uplift Considerations: DWG \| DXF LSU26: DWG \| DXF