NRUZ Retrofit U Hangers for Panelized Roof Construction for use with Nailers

The NRUZ series of retrofit hangers is designed specifically for use on nailers on steel trusses. Like the original RUZ for glulam purlins, the new NRUZ are designed specifically to fit around existing Simpson panelized roof hangers such as the F or HFN series.

In some cases, existing panelized roof hangers may need replacement due to excessive gapping, damage incurred during field erection or corrosion from roof leaks or condensation. The NRUZ allows you to quickly and effectively match the capacity of these hangers without having to remove the original connectors or disassemble the roof.

When installed with no more than a 1/8" gap between the original hanger and the purlin, the NRUZ series provides equal or greater capacity than Simpson's F, HF and HFN series hangers. See table for data on gaps greater than 1/8".

Note: If retrofitting corroded hangers, the cause of moisture intrusion into the roof system must be determined and resolved before the hangers are installed.

Material: 16 gauge

Finish: G185 ZMAX® coating; see Corrosion Information.

Installation:

Tightly install NRUZ hanger around existing panelized roof hanger.
Install fasteners as referenced in tables.
Use all specified fasteners. See General Notes.

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
NRU24-2Z	No code listing. Please contact us for test data.
NRU24Z	No code listing. Please contact us for test data.
NRU26-2Z	No code listing. Please contact us for test data.
NRU26Z	No code listing. Please contact us for test data.
NRU34Z	No code listing. Please contact us for test data.
NRU36Z	No code listing. Please contact us for test data.
NRU44Z	No code listing. Please contact us for test data.
NRU46Z	No code listing. Please contact us for test data.
NRUZ	See specific model numbers for code listings.

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

Download the Simpson AutoCad Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
NRU24-2Z	NRU24-2Z: DWG \| DXF NRU24-2Z front view: DWG \| DXF NRU24-2Z left view: DWG \| DXF NRU24-2Z right view: DWG \| DXF NRU24-2Z top view: DWG \| DXF	None for this model
NRU24Z	NRU24Z: DWG \| DXF NRU24Z front view: DWG \| DXF NRU24Z left view: DWG \| DXF NRU24Z right view: DWG \| DXF NRU24Z top view: DWG \| DXF	None for this model
NRU26-2Z	NRU26-2Z: DWG \| DXF NRU26-2Z front view: DWG \| DXF NRU26-2Z left view: DWG \| DXF NRU26-2Z right view: DWG \| DXF NRU26-2Z top view: DWG \| DXF	None for this model
NRU26Z	NRU26Z: DWG \| DXF NRU26Z front view: DWG \| DXF NRU26Z left view: DWG \| DXF NRU26Z right view: DWG \| DXF NRU26Z top view: DWG \| DXF	None for this model
NRU34Z	NRU34Z: DWG \| DXF NRU34Z front view: DWG \| DXF NRU34Z left view: DWG \| DXF NRU34Z right view: DWG \| DXF NRU34Z topview: DWG \| DXF	None for this model
NRU36Z	NRU36Z: DWG \| DXF NRU36Z front view: DWG \| DXF NRU36Z left view: DWG \| DXF NRU36Z right view: DWG \| DXF NRU36Z top view: DWG \| DXF	None for this model
NRU44Z	NRU44Z: DWG \| DXF NRU44Z front view: DWG \| DXF NRU44Z left view: DWG \| DXF NRU44Z right view: DWG \| DXF NRU44Z top view: DWG \| DXF	None for this model
NRU46Z	NRU46Z: DWG \| DXF NRU46Z front view: DWG \| DXF NRU46Z left view: DWG \| DXF NRU46Z right view: DWG \| DXF NRU46Z top view: DWG \| DXF	None for this model
NRUZ	None for this model	None for this model