ATS-ABR Anchor Bolt Rod
Product Details
ATS-ABR anchor bolt rods are rods for use with the ABL anchor bolt locator. When these are used with the ABL (and plate washer, if needed), they combine to make an economical podium-deck anchorage solution. Anchorage specification per designer.
Key Features
- Available in standard or high strength
- Anchor rod diameters from 1/2" to 1 1/4"
- Standard lengths available 18", 24", 30" or 36"
- Specify "HDG" for hot-dip galvanized
Material
- Standard (model ABR_) – min. Fu = 58 ksi
- High-strength (model ABR_H) – up to 1" diameter – min. Fu = 120 ksi; 1 1/8" and 1 1/4" – min. Fu = 125 ksi
Finish
- None
Product Notes
- This is a material offer and no guidance or capacities have been provided by Simpson Strong-Tie. The design of the anchorage is strictly up to the designer.
Product Information Tables
| Model No. | Rod Diameter (in.) | Fy (ksi) | Fu (ksi) |
|---|---|---|---|
| ATS-ABR5 | 5/8 | 36 | 58 |
| ATS-ABR6 | 3/4 | 36 | 58 |
| ATS-ABR7 | 7/8 | 36 | 58 |
| ATS-ABR8 | 1 | 36 | 58 |
| ATS-ABR9 | 1 1/8 | 36 | 58 |
| ATS-ABR10 | 1 1/4 | 36 | 58 |
| ATS-ABR5H | 5/8 | 92 | 120 |
| ATS-ABR6H | 3/4 | 92 | 120 |
| ATS-ABR7H | 7/8 | 92 | 120 |
| ATS-ABR8H | 1 | 92 | 120 |
| ATS-ABR9H | 1 1/8 | 105 | 125 |
| ATS-ABR10H | 1 1/4 | 105 | 125 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|