BP Bearing Plate
Strong-Rod® ATS Components
This product's information may differ depending on the category of use. You are currently viewing details related to Strong-Rod® ATS Components. You can also view product information related to the categories of: Bearing Plates, Concrete Connectors for Cold-Formed Steel Construction, Strong-Rod® URS Components
Product Details
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coating to protect the plate from corrosion when exposed to the elements or certain types of treated lumber.
Key Features
- Replaces standard cut-washers while providing a greater bearing surface
- Sized for most common anchor bolt sizes: 3/8", 1/2", 5/8", 3/4", 7/8" and 1"
- May be ordered HDG for higher corrosion resistance
Material
- See table
Finish
- See table; see Corrosion Information. BPs also available in black powder coat; add PC to model number (e.g., BP 1/2PC).
Installation
- See General Notes.
- For shearwall applications, position edge of plate washer within 1/2" of sheathed edge of sill plate.
- The BP5/8SKT uses 1/4" x 1 1/2" Strong-Drive® SDS Heavy-Duty Connector screws to provide lateral resistance when 5/8"-diameter sill holes are overdrilled (screws are provided). The shear capacity of the connection and the sill/anchor bolt shall be determined by the designer for each installation.
- No additional standard cut-washer required.
- Tighten each anchor bolt with a nut and BP.
Related Literature
Product Information Table
| Model No. | Bolt Dia. (in.) | Thickness | W (in.) | L (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|
|
Footnotes
|
||||||
| BP 1 | 1 | 3/8 in. | 3 1/2 | 3 1/2 | None | 1 |
| BP 1/2 | 1/2 | 3/16 in. | 2 | 2 | None | 1 |
| BP 1/2-3 | 1/2 | 3 ga. | 3 | 3 | None | 1 |
| BP 1/2-3HDG | 1/2 | 3 ga. | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 1/2HDG | 1/2 | 3/16 in. | 2 | 2 | Hot-Dip Galvanized | 1 |
| BP 1/2-R | 1/2 | 3/16 in. | 2 | 2 | None | 1 |
| BP 1-1/2HDG | 1 1/2 | 3/8 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 1-1/4HDG | 1 1/4 | 3/8 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 1-3/4HDG | 1 3/4 | 3/8 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 1-3HDG | 1 | 3/8 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 3/4-3 | 3/4 | 3 ga. | 3 | 3 | None | 1 |
| BP 3/4-3HDG | 3/4 | 3 ga. | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 3/4HDG | 3/4 | 5/16 in. | 2 3/4 | 2 3/4 | Hot-Dip Galvanized | 1 |
| BP 3/8-2 | 3/8 | 3/16 in. | 2 | 2 | None | 1 |
| BP 5/8 | 5/8 | 1/4 in. | 2 1/2 | 2 1/2 | None | 1 |
| BP 5/8-2 | 5/8 | 3/16 in. | 2 | 2 | None | 1 |
| BP 5/8-2HDG | 5/8 | 3/16 in. | 2 | 2 | Hot-Dip Galvanized | 1 |
| BP 5/8-3 | 5/8 | 3 ga. | 3 | 3 | None | 1 |
| BP 5/8-3HDG | 5/8 | 3 ga. | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 5/8HDG | 5/8 | 1/4 in. | 2 1/2 | 2 1/2 | Hot-Dip Galvanized | 1 |
| BP 7/8-2 | 7/8 | 3/8 in. | 1 15/16 | 2 1/4 | Zinc Plated | 1 |
| BP 7/8HDG | 7/8 | 5/16 in. | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 7/8-R | 7/8 | 5/16 in. | 3 | 3 | None | 1 |
| BP5/8S | 5/8 | 3 ga. | 4 | 2 | Zinc Plated | 1 |
| BP5/8SKT | 5/8 | 3 ga. | 4 | 2 | Zinc Plated | 50 |
| BP5/8SKTHDG | 5/8 | 3 ga. | 4 | 2 | Hot-Dip Galvanized | 50 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
