BP Bearing Plate
Bearing Plates
This product's information may differ depending on the category of use. You are currently viewing details related to Bearing Plates. You can also view product information related to the categories of: Concrete Connectors for Cold-Formed Steel Construction, Strong-Rod® ATS Components, Strong-Rod® URS Components
Product Details
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coating to protect the plate from corrosion when exposed to the elements or certain types of treated lumber.
Key Features
- Replaces standard cut-washers while providing a greater bearing surface
- Sized for most common anchor bolt sizes: 3/8", 1/2", 5/8", 3/4", 7/8" and 1"
- May be ordered HDG for higher corrosion resistance
Material
- See table
Finish
- See table; see Corrosion Information. BPs also available in black powder coat; add PC to model number (e.g., BP 1/2PC).
Installation
- See General Notes.
- For shearwall applications, position edge of plate washer within 1/2" of sheathed edge of sill plate.
- The BP5/8SKT uses 1/4" x 1 1/2" Strong-Drive® SDS Heavy-Duty Connector screws to provide lateral resistance when 5/8"-diameter sill holes are overdrilled (screws are provided). The shear capacity of the connection and the sill/anchor bolt shall be determined by the designer for each installation.
- No additional standard cut-washer required.
- Tighten each anchor bolt with a nut and BP.
Related Literature
Product Information Table
| Model No. | Bolt Dia. (in.) | Thickness | W (in.) | L (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|
|
Footnotes
|
||||||
| BP 1 | 1 | 3/8 in. | 3 1/2 | 3 1/2 | None | 1 |
| BP 1/2 | 1/2 | 3/16 in. | 2 | 2 | None | 1 |
| BP 1/2-3 | 1/2 | 3 ga. | 3 | 3 | None | 1 |
| BP 1/2-3HDG | 1/2 | 3 ga. | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 1/2HDG | 1/2 | 3/16 in. | 2 | 2 | Hot-Dip Galvanized | 1 |
| BP 1/2-R | 1/2 | 3/16 in. | 2 | 2 | None | 1 |
| BP 1-1/2HDG | 1 1/2 | 3/8 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 1-1/4HDG | 1 1/4 | 3/8 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 1-3/4HDG | 1 3/4 | 3/8 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 1-3HDG | 1 | 3/8 | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 3/4-3 | 3/4 | 3 ga. | 3 | 3 | None | 1 |
| BP 3/4-3HDG | 3/4 | 3 ga. | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 3/4HDG | 3/4 | 5/16 in. | 2 3/4 | 2 3/4 | Hot-Dip Galvanized | 1 |
| BP 3/8-2 | 3/8 | 3/16 in. | 2 | 2 | None | 1 |
| BP 5/8 | 5/8 | 1/4 in. | 2 1/2 | 2 1/2 | None | 1 |
| BP 5/8-2 | 5/8 | 3/16 in. | 2 | 2 | None | 1 |
| BP 5/8-2HDG | 5/8 | 3/16 in. | 2 | 2 | Hot-Dip Galvanized | 1 |
| BP 5/8-3 | 5/8 | 3 ga. | 3 | 3 | None | 1 |
| BP 5/8-3HDG | 5/8 | 3 ga. | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 5/8HDG | 5/8 | 1/4 in. | 2 1/2 | 2 1/2 | Hot-Dip Galvanized | 1 |
| BP 7/8-2 | 7/8 | 3/8 in. | 1 15/16 | 2 1/4 | Zinc Plated | 1 |
| BP 7/8HDG | 7/8 | 5/16 in. | 3 | 3 | Hot-Dip Galvanized | 1 |
| BP 7/8-R | 7/8 | 5/16 in. | 3 | 3 | None | 1 |
| BP5/8S | 5/8 | 3 ga. | 4 | 2 | Zinc Plated | 1 |
| BP5/8SKT | 5/8 | 3 ga. | 4 | 2 | Zinc Plated | 50 |
| BP5/8SKTHDG | 5/8 | 3 ga. | 4 | 2 | Hot-Dip Galvanized | 50 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
