×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Deck-Drive™ DSV WOOD Screw (Collated)

The Deck-Drive DSV Wood screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today's wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Available in hand-drive and in collated strips for use in our Quik Drive® auto-feed screw driving system.

Key Features

  • Low-torque threads allow up to 35% more screws to be driven per battery charge
  • Rimmed flat head with nibs design countersinks easily and provides a clean, finished appearance
  • High-low threads with Type-17 point provides fast starts
  • Optimized threads for dimensional lumber
  • Quik Guard® coating provides corrosion resistance for exterior and certain preservative-treated wood applications
  • Meets the performance requirements of ICC-ES AC257 exposure conditions 1 and 3
  • Colors to blend in with most woods
  • T25 6-lobe driver bit: BITTX25

Applications

  • Preservative-treated decking and exterior wood-to-wood applications

Related Links

Catalog Pages

Related Literature

Connectors, Fasteners & Anchors for Mass Timber Construction
C-C-MASSTIMBER24
A catalog featuring connectors, fasteners and anchors for mass timber and CLT construction solutions.
Catalog
Fastening Systems Catalog
C-F-2023
A catalog including new product information as well as any applicable specification and installation instructions for Simpson Strong-Tie® fasteners and Quik Drive® systems.
Catalog
Fastening Systems Technical Guide
C-F-2023TECHSUP
A technical document featuring engineering information for structural fasteners featured in the C-F-2023 Fastening Systems Catalog.
Catalog
Guía técnica de los sistemas de sujeción
C-F-2023TECHSP
Un documento técnico información de ingeniería para los sujetadores estructurales que se incluyen en el C-F-2019SP Catálogo de sistemas de sujeción.
Catalog
Sistemas de sujeción
C-F-2023SP
Catálogo que incluye información sobre productos nuevos y las instrucciones de instalación y especificaciones correspondientes para los sujetadores Simpson Strong-Tie® y los sistemas Quik Drive®.
Catalog
Fastening Systems Technical Supplement for Canada
C-F-2017CANADD
A technical information addendum for Simpson Strong-Tie Fasteners in Canada.
Catalog
Deck Connection and Fastening Guide
F-DECKCODE22
A guide to deck building and for retrofitting safer, longer-lasting outdoor decks, with 2018 and 2021 IRC/IBC code-compliant solutions for using the latest anchors, connectors and fasteners.
Product Guide
Deck-Drive™ DSV WOOD Screw — Drive up to 35% More Screws per Battery Charge
F-F-DSV24
A flier providing product and installation information for the Deck-Drive™ DSV Wood screw.
Flier
Do More with a Total Crating Solution
S-O-CRATE23
A sales flier promoting Simpson Strong-Tie crating performance solutions and product offerings.
Flier
Make Faster Work of Decks and Subfloors
S-Q-QD300S_DW23
A sales flier outlining features and benefits of the Quik Drive® PRO300S cordless auto-feed screw driving system.
Flier
Quik Drive - Now CORDLESS
S-Q-QD250_DW22
A sales flier outlining features and benefits of the Quik Drive® PRO250G2 cordless auto-feed screw driving system.
Flier
Quik Drive® Project PRO™ Screw Driving Tool
F-Q-PROJPRO23
A flier promoting Project PRO™ auto-feed screw driving system, with product details and ordering information.
Flier
Quik Drive® Project PRO™ Fastening System Operator's Manual
T-Q-PROJPRO23
A multilingual user guide for the Quik Drive® Project PRO™ auto-feed screw driving system.
Owner Manual

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Coating/Material Screw Size Length (in.) Head Diameter (in.) Drive Type Head Type Thread Type Point Type Color Compatible Tools Packaging Qty.
DSVG212S Quik Guard® Coating #10 2 1/2 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Gray Quik Drive® PRO250G2, Quik Drive® PRO300SG2 1000
DSVG3S Quik Guard® Coating #10 3 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Gray Quik Drive® PRO300SG2 1000
DSVR158S Quik Guard® Coating #8 1 5/8 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red Quik Drive® PRO200SG2, Quik Drive® PRO250G2 2000
DSVR212S Quik Guard® Coating #10 2 1/2 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red Quik Drive® PRO250G2, Quik Drive® PRO300SG2 1000
DSVR2S Quik Guard® Coating #10 2 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red Quik Drive® PRO200SG2, Quik Drive® PRO250G2, Quik Drive® PRO300SG2 1500
DSVR3S Quik Guard® Coating #10 3 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red Quik Drive® PRO300SG2 1000
DSVT114S Quik Guard® Coating #8 1 1/4 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO200SG2 2000
DSVT158S Quik Guard® Coating #8 1 5/8 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO200SG2, Quik Drive® PRO250G2 2000
DSVT212S Quik Guard® Coating #10 2 1/2 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO250G2, Quik Drive® PRO300SG2 1000
DSVT2S Quik Guard® Coating #10 2 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO200SG2, Quik Drive® PRO250G2, Quik Drive® PRO300SG2 1500
DSVT3S Quik Guard® Coating #10 3 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO300SG2 1000
HCKDSVT158S Quik Guard® Coating #8 1 5/8 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO200SG2, Quik Drive® PRO250G2 1000
HCKDSVT212S Quik Guard® Coating #10 2 1/2 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO250G2, Quik Drive® PRO300SG2 500
HCKDSVT2S Quik Guard® Coating #10 2 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO200SG2, Quik Drive® PRO250G2, Quik Drive® PRO300SG2 750
HCKDSVT3S Quik Guard® Coating #10 3 0.333 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan Quik Drive® PRO300S 500

Load Tables

Allowable Shear Loads

Size x Length (in.) Model No. Thread Length (in.) DFL/SP Reference Allowable Shear Load (in.) SPF/HF Reference Allowable Shear Load (lb.)
Side Member Thickness (in.) Side Member Thickness (in.)
1.5 2.0 1.5 2.0
#10 x 2 1/2 DSV212 1.50 106 ‐ 83 ‐
#10 x 3 DSV3 1.50 173 99 131 80
  1. Allowable loads are based on full penetration into the main member. Full penetration is the screw length minus the side member thickness.
  2. Allowable loads are shown at the wood load duration factor of CD = 1.0. Loads may be increased for load duration per the building code up to a CD = 1.6. Tabulated values must be multiplied by all applicable adjustment factors per the NDS; For in-service moisture content greater than 19%, use CM = 0.62.
  3. Loads are based on installation into the side grain of the wood with the screw axis perpendicular to the face of the member.
  4. Loads are based on tests of connections made with same species as main and side members. For connections with mixed species, use the loads for the species with the lower specific gravity.
  5. Engineered wood must have a minimum modulus of elasticity grade of 0.80E and have a minimum equivalent specific gravity at least 0.50 to use the DFL/SP values or 0.42 to use the SPF/HF values.

Allowable Withdrawal and Pull-Through Loads

Size x Length (in.) Model No. Thread Length (in.) Reference Allowable Withdrawal, W (lb./in.) Reference Maximum Withdrawal, Wmax (lb./in.) Reference Pull-Through, (lb.)
DFL/SP SPF/HF DFL/SP SPF/HF DFL/SP SPF/HF
#10 x 2 DSV2 1.25 121 94 150 115 174 154
#10 x 2 1/2 DSV212 1.50 180 140
#10 x 3 DSV3 1.50 180 140
  1. The tabulated Reference Allowable Withdrawal design value, W, is in pounds per inch of the thread penetration into the side grain of the main member.
  2. The tabulated Reference Maximum Withdrawal design value, Wmax, is in pounds where the entire end thread length is embedded into the side grain of the main member.
  3. Reference withdrawal design values, W and Wmax, are shown at CD = 1.0. Loads may be increased for load duration per the building code up to CD = 1.6. Tabulated values must be multiplied by all applicable adjustment factors from the NDS; For in-service moisture content greater than 19%, use CM = 0.70.
  4. Embedded thread length is that portion of the end threads in the main member including the screw tip.
  5. Reference Pull-Through values are based on pull-through of a 1 1/2" -thick side member.
  6. Engineered wood must have a minimum modulus of elasticity grade of 1.55E and a minimum equivalent specific at least 0.50 to use the DFL/SP values or 0.42 to use the SPF/HF values.

Connection Geometry

Condition Minimum Distance or Spacing (in.) Reduction Factor
Edge Distance Perpendicular to grain loading 3/4 0.91
Parallel to grain loading 1/2 1.00
End Distance Perpendicular to grain loading 4 0.91
Parallel to grain loading 4 1.00
Spacing Between Fasteners in a Row Perpendicular to grain loading 2 0.75
Parallel to grain loading 2 1.00
Spacing Between Row Perpendicular to grain loading Non-staggered row 1 0.75
Staggered rows 1 1.00
Parallel to grain loading Non-staggered row 1 0.88
Staggered rows 1 1.00
  1. Edge distances, end distances, and spacing of the screws must be sufficient to prevent splitting of the wood, or as required by this table, or when applicable as recommended by the structural composite lumber manufacturer, whichever is the most restrictive.
  2. Allowable shear loads shall be multiplied by the applicable tabulated reduction factors when used in the corresponding geometry.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products

Quik Drive® PRO200SG2 Multi-Purpose System
Quik Drive® PRO200SG2 Multi-Purpose System
Quik Drive® PRO250G2 Subfloor System
Quik Drive® PRO250G2 Subfloor System
Quik Drive® PRO300SG2 Decking System
Quik Drive® PRO300SG2 Decking System
Quik Drive® Project Pro™
Quik Drive® Project Pro™
Screw Driving Tool