MSTC Medium Strap Tie with Countersunk Nail Slots
Lateral Connectors, Ties and Straps
This product's information may differ depending on the category of use. You are currently viewing details related to Lateral Connectors, Ties and Straps. You can also view product information related to the category: Straight Straps
Product Details
The MSTC is designed to resist tension loads in wood-to-wood applications. This medium strap tie utilizes a staggered nail pattern to help minimize wood splitting. The high-capacity MSTC also features countersunk nail slots for a lower nailing profile.
Key Features
- Load-rated, precut strap designed for quick installation and optimal performance
- Loads have been increased for wind and seismic forces
- Floor-to-floor clear span application
Material
- See table
Finish
- Galvanized
Installation
- Use all specified fasteners; see General Notes
Options
- Special sizes can be made to order; contact Simpson Strong-Tie
Related Literature
Product Information Table
| Model No. | Thickness (mil) | Ga. | W (in.) | L (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|
| MSTC28 | 54 | 16 | 3 | 28 1/4 | Zinc Galvanized, G90 | 1 |
| MSTC40 | 54 | 16 | 3 | 40 1/4 | Zinc Galvanized, G90 | 1 |
| MSTC52 | 54 | 16 | 3 | 52 1/4 | Zinc Galvanized, G90 | 1 |
| MSTC66 | 68 | 14 | 3 | 65 3/4 | Zinc Galvanized, G90 | 1 |
| MSTC78 | 68 | 14 | 3 | 77 3/4 | Zinc Galvanized, G90 | 1 |
Load Tables
Many of these products are approved for installation with Strong-Drive® SD Connector screws.
- See Straps and Ties General Notes.
- Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Floor-to-Floor Span Table
Many of these products are approved for installation with Strong-Drive® SD Connector screws.
- See Straps and Ties General Notes.
- Install nails as specified by designer. Nail values may not be combined.
- Splitting may be a problem with installations on lumber smaller than 3 1/2"; either fill every nail hole with 0.148" x 1 1/2" nails or fill every other hole with 0.162" x 2 1/2" nails. Reduce the allowable load based on the size and quantity of fasteners used.
- Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.
Load Values with Strong-Drive® SD Connector Screws
| Model No. | Fasteners (Total) | (DF/SP) Allowable Tension Loads | (SPF/HF) Allowable Tension Loads |
| (160) | (160) | ||
| MSTC28 | 36-SD9112 | 4735 | 3225 |
| MSTC40 | 46-SD9112 | 4735 | 4120 |
| MSTC52 | 42-SD9112 | 4735 | 3765 |
| MSTC66 | 44-SD9112 | 5850 | 3940 |
| MSTC78 | 44-SD9112 | 5850 | 3940 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
