Drop-In (DIASS) Stainless-Steel Internally Threaded Anchor
Product Details
Drop-in anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
Key Features
- Hand- and power-setting tools available for fast, easy and economical installation
- Fixed-depth stop bit helps you drill to the correct depth every time
Material
- Stainless steel
Installation
- Drill a hole in the base material using the appropriate diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/8" for flush mounting. Blow the hole clean using compressed air. Overhead installations need not be blown clean.
- Insert designated anchor into hole. Tap with hammer until flush against surface.
- Using the designated drop-in setting tool, drive expander plug toward the bottom of the anchor until shoulder of setting tool makes contact with the top of the anchor.
- Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
Caution
- Oversized holes will make it difficult to set the anchor and will reduce the anchor's load capacity.
Design Information and Load Tables
Related Links
Catalog Pages
Related Literature
Product Information Table
| Model No. | Description | Coating/Material | Drill Bit Dia. (in.) | Length (in.) | Rod Dia. (in.) | Thread Length (in.) | TPI | Component Material, Anchor Body | Component Material, Expander Plug | Component Material, Thread | Box Qty. | Carton Qty. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DIA25SS | Drop-In Anchor | Type 303/304 Stainless Steel | 3/8 | 1 | 1/4 | 3/8 | 20 | AISI 303. Meets chemical requirements of ASTM A582 | AISI 303 | UNC | 100 | 500 |
| DIA37SS | Drop-In Anchor | Type 303/304 Stainless Steel | 1/2 | 1 9/16 | 3/8 | 5/8 | 16 | AISI 303. Meets chemical requirements of ASTM A582 | AISI 303 | UNC | 50 | 250 |
| DIA50SS | Drop-In Anchor | Type 303/304 Stainless Steel | 5/8 | 2 | 1/2 | 3/4 | 13 | AISI 303. Meets chemical requirements of ASTM A582 | AISI 303 | UNC | 50 | 200 |
| DIA62SS | Drop-In Anchor | Type 303/304 Stainless Steel | 7/8 | 2 1/2 | 5/8 | 1 | 11 | AISI 303. Meets chemical requirements of ASTM A582 | AISI 303 | UNC | 25 | 100 |
| DIA75SS | Drop-In Anchor | Type 303/304 Stainless Steel | 1 | 3 1/8 | 3/4 | 1 1/4 | 10 | AISI 303. Meets chemical requirements of ASTM A582 | AISI 303 | UNC | 20 | 80 |
| DIA256SS | Drop-In Anchor | Type 316 Stainless Steel | 3/8 | 1 | 1/4 | 3/8 | 20 | Type 316 | Type 316 | UNC | 100 | 500 |
| DIA376SS | Drop-In Anchor | Type 316 Stainless Steel | 1/2 | 1 9/16 | 3/8 | 5/8 | 16 | Type 316 | Type 316 | UNC | 50 | 250 |
| DIA506SS | Drop-In Anchor | Type 316 Stainless Steel | 5/8 | 2 | 1/2 | 3/4 | 13 | Type 316 | Type 316 | UNC | 50 | 200 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
