HTQ Heavy T Strap, Quick-Install
Product Details
The HTQ strap is designed for girder-to-pile connections. This heavy, versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. Installed in pairs, the HTQ strap is load rated. It installs quickly and easily with the patented Strong-Drive® SDWH Timber-Hex HDG screw (not included).
Key Features
- Hot-dip galvanized (HDG) for corrosion resistance
- Load rated for uplift and lateral forces
- Strap width: 2-1/2 in.
Material
- 7 ga.
Finish
- HDG
Installation
- Use all specified fasteners; see General Notes
Related Literature
Product Information Table
| Model No. | Ga. | W (in.) | H (in.) | L (in.) | Coating | Packaging Qty. |
|---|---|---|---|---|---|---|
| 1616HTQ | 7 | 2 1/2 | 16 | 16 | Hot-Dip Galvanized | 1 |
Load Tables
| Model No. | Ga. | Dimensions (in.) | Fasteners | Allowable Loads | |||
|---|---|---|---|---|---|---|---|
| L | H | W | Tension/Uplift | F1 | |||
| (100/160) | (100/160) | ||||||
| 1616HTQ | 7 | 16 | 16 | 2 1/2 | (10) SDWH27400G | 2,670 | 870 |
- Loads are for a single part and may be doubled when installed in pairs on opposite sides of a minimum 5 1/2" thick member.
- Loads assume a continuous beam.
- Screws: SDWH27400G = 0.27"-diameter x 4"-long Strong-Drive SDWH Timber-Hex HDG screw. Longer SDWH27G screws may be used.
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
