×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Strong-Bolt® 2 Wedge Anchor — Stainless Steel

Code listed for cracked and uncracked concrete applications, the Strong-Bolt 2 wedge-type expansion anchor is an optimal choice for high-performance even in seismic and high-wind conditions. Dual undercutting embossments on each clip segment enable secondary expansion should a crack form and intersect the anchor location; this feature significantly increases the ability of Strong-Bolt 2 to carry load if the hole expands. The Strong-Bolt 2 stainless-steel wedge anchor offers long-lasting corrosion resistance for a wide variety of service environments.

Key Features

  • Chamfered top designed to prevent mushrooming during installation
  • Qualified for static and seismic loading conditions (seismic design categories A through F)
  • Suitable for horizontal, vertical and overhead applications
  • Qualified for minimum concrete thickness of 3 1/4", and lightweight concrete-over-steel deck
  • Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
  • Tested per ACI355.2 and AC193

Material

  • Stainless steel (Type 304; Type 316)
     

Installation

  1. Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified minimum hole depth, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling.
  2. Assemble the anchor with nut and washer so the top of the nut is flush with the top of the anchor. Place the anchor in the fixture, and drive it into the hole until the washer and nut are tight against the fixture.
  3. Tighten to the required installation torque.
Strong-Bolt 2 Diameter (in.) Drill Bit Size (in.) Min. Fixture Hole (in.) Wrench Size (in.) Concrete Installation Torque (ft.-lbf.) Stainless Steel
1/4 1/4 5/16 7/16 4
3/8 3/8 7/16 9/16 30
1/2 1/2 9/16 3/4 65
5/8 5/8 11/16 90 80
3/4 3/4 7/8 1 1/8 150

Caution

  • Do not use an impact wrench to set or tighten the Strong-Bolt 2 anchor
  • Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor's load capacity

Related Literature

Anchoring, Fastening, Restoration and Strengthening Systems for Concrete and Masonry
C-A-2023
A catalog of products belonging to our anchoring, fastening, restoration and strengthening systems for concrete and masonry.
Catalog
Sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería
C-A-2023SP
Un catálogo completo de productos e información para los sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería.
Catalog
2022–2025 Product Guide — Anchoring, Fastening Systems and Restoration Solutions for Concrete and Masonry
S-A-PG22
A product guide providing information on Simpson Strong-Tie® anchoring adhesives, mechanical anchors, direct fastening, carbide drill bits and restoration products for concrete and masonry.
Product Guide
2022–2025 Guía de productos — Sistemas de anclaje, sujeción, restauración y fortalecimiento para concreto y mampostería
S-A-PG22SP
Guía de productos para Simpson Strong-Tie® con información sobre anclajes adhesivos, anclajes mecánicos, sujeción directa, brocas de carburo y productos para restauración para concreto y mampostería.
Product Guide
Strong-Bolt® 2 Design Information — Concrete
TEB-A-STB2-24
This technical engineering bulletin provides a supplement to the Anchoring, Fastening and Restoration Systems for Concrete and Masonry catalog.
Technical Bulletin
Canadian Addendum for 2023 Anchor Catalogue
TEBC-A-2023
This technical engineering bulletin for Canada, TEBC-A-2023, provides a supplement to the Anchoring, Fastening and Restoration Systems for Concrete and Masonry catalog, C-A-2023.
Technical Bulletin
Safety Data Sheet for Mechanical Anchors
SDS-MechAnchors-NA-ENG-0520
Intended to provide information for use in workplace chemical management; information such as physical properties; hazards; protective measures; precautions for handling, storing, and transportation.
SDS
Ficha de Datos de Seguridad para Anclas Mecánicas
SDS-MechAnchors-NA-ES
Diseñado para dar información útil en la gestión de químicos en el lugar de trabajo; p.ej. propiedades físicas; riesgos; medidas de protección; precauciones para manejo, almacenamiento y transporte.
SDS
Fiche de Données de Sécurité pour Ancrages Mécaniques
SDS-MechAnchors-NA-FRCA
Prévu pour fournir de l’information sur la gestion des produits chimiques au travail comme propriétés physiques, dangers, mesures de protection et précautions de manipulation, stockage et transport.
SDS
Simpson Strong-Tie® Suggested General Notes for Anchor Products (.docx)
MF-A-GENNOTES24
Simpson Strong-Tie® Suggested General Notes for Anchor Products
MasterFormat® Specification
Simpson Strong-Tie® Suggested General Notes for Anchor Products (PDF)
MF-A-GENNOTES24
Simpson Strong-Tie® Suggested General Notes for Anchor Products
MasterFormat® Specification

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Coating/Material Size (in.) Drill Bit Dia. (in.) Thread Length (in.) Component Material, Anchor Body Component Material, Nut Component Material, Washer Component Material, Clip Packaging Qty.
Footnotes
  1. Models STB2-25134xSS, STB2-37214xSSR50, STB2-50234xSSR25, STB2-62312xSSR20, and STB2-75434xSSR10 do not meet minimum embedment in code report.
STB2-251344SS Type 304 Stainless Steel 1/4 x 1 3/4 1/4 1 5/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 100
STB2-252144SS Type 304 Stainless Steel 1/4 x 2 1/4 1/4 1 7/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 100
STB2-253144SS Type 304 Stainless Steel 1/4 x 3 1/4 1/4 2 7/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 100
STB2-372144SSR50 Type 304 Stainless Steel 3/8 x 2 1/4 3/8 1 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 50
STB2-372344SS Type 304 Stainless Steel 3/8 x 2 3/4 3/8 1 5/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 50
STB2-373004SS Type 304 Stainless Steel 3/8 x 3 3/8 1 9/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 50
STB2-373124SS Type 304 Stainless Steel 3/8 x 3 1/2 3/8 2 1/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 50
STB2-373344SS Type 304 Stainless Steel 3/8 x 3 3/4 3/8 2 5/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 50
STB2-375004SS Type 304 Stainless Steel 3/8 x 5 3/8 3 9/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 50
STB2-377004SS Type 304 Stainless Steel 3/8 x 7 3/8 5 9/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 50
STB2-501004SS Type 304 Stainless Steel 1/2 x 10 1/2 6 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 25
STB2-502344SSR25 Type 304 Stainless Steel 1/2 x 2 3/4 1/2 1 1/4 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 25
STB2-503344SS Type 304 Stainless Steel 1/2 x 3 3/4 1/2 2 1/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 25
STB2-504144SS Type 304 Stainless Steel 1/2 x 4 1/4 1/2 2 9/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 25
STB2-504344SS Type 304 Stainless Steel 1/2 x 4 3/4 1/2 3 1/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 25
STB2-505124SS Type 304 Stainless Steel 1/2 x 5 1/2 1/2 3 13/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 25
STB2-507004SS Type 304 Stainless Steel 1/2 x 7 1/2 5 5/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 25
STB2-508124SS Type 304 Stainless Steel 1/2 x 8 1/2 1/2 6 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 25
STB2-621004SS Type 304 Stainless Steel 5/8 x 10 5/8 6 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 10
STB2-623124SSR20 Type 304 Stainless Steel 5/8 x 3 1/2 5/8 1 5/8 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 20
STB2-624124SS Type 304 Stainless Steel 5/8 x 4 1/2 5/8 2 7/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 20
STB2-625004SS Type 304 Stainless Steel 5/8 x 5 5/8 2 15/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 20
STB2-626004SS Type 304 Stainless Steel 5/8 x 6 5/8 3 15/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 20
STB2-627004SS Type 304 Stainless Steel 5/8 x 7 5/8 4 15/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 20
STB2-628124SS Type 304 Stainless Steel 5/8 x 8 1/2 5/8 6 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 20
STB2-754344SSR10 Type 304 Stainless Steel 3/4 x 4 3/4 3/4 2 1/2 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 10
STB2-755124SS Type 304 Stainless Steel 3/4 x 5 1/2 3/4 3 3/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 10
STB2-756144SS Type 304 Stainless Steel 3/4 x 6 1/4 3/4 3 15/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 10
STB2-757004SS Type 304 Stainless Steel 3/4 x 7 3/4 4 11/16 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 10
STB2-758124SS Type 304 Stainless Steel 3/4 x 8 1/2 3/4 6 Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 or Type 316 Stainless Steel 10
STB2-251346SS Type 316 Stainless Steel 1/4 x 1 3/4 1/4 1 5/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 100
STB2-252146SS Type 316 Stainless Steel 1/4 x 2 1/4 1/4 1 7/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 100
STB2-253146SS Type 316 Stainless Steel 1/4 x 3 1/4 1/4 2 7/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 100
STB2-372146SSR50 Type 316 Stainless Steel 3/8 x 2 1/4 3/8 1 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 50
STB2-372346SS Type 316 Stainless Steel 3/8 x 2 3/4 3/8 1 5/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 50
STB2-373006SS Type 316 Stainless Steel 3/8 x 3 3/8 1 9/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 50
STB2-373126SS Type 316 Stainless Steel 3/8 x 3 1/2 3/8 2 1/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 50
STB2-373346SS Type 316 Stainless Steel 3/8 x 3 3/4 3/8 2 5/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 50
STB2-375006SS Type 316 Stainless Steel 3/8 x 5 3/8 3 9/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 50
STB2-377006SS Type 316 Stainless Steel 3/8 x 7 3/8 5 9/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 50
STB2-501006SS Type 316 Stainless Steel 1/2 x 10 1/2 6 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 25
STB2-502346SSR25 Type 316 Stainless Steel 1/2 x 2 3/4 1/2 1 1/4 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 25
STB2-503346SS Type 316 Stainless Steel 1/2 x 3 3/4 1/2 2 1/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 25
STB2-504146SS Type 316 Stainless Steel 1/2 x 4 1/4 1/2 2 9/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 25
STB2-504346SS Type 316 Stainless Steel 1/2 x 4 3/4 1/2 3 1/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 25
STB2-505126SS Type 316 Stainless Steel 1/2 x 5 1/2 1/2 3 13/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 25
STB2-507006SS Type 316 Stainless Steel 1/2 x 7 1/2 5 5/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 25
STB2-508126SS Type 316 Stainless Steel 1/2 x 8 1/2 1/2 6 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 25
STB2-621006SS Type 316 Stainless Steel 5/8 x 10 5/8 6 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 10
STB2-623126SSR20 Type 316 Stainless Steel 5/8 x 3 1/2 5/8 1 5/8 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 20
STB2-624126SS Type 316 Stainless Steel 5/8 x 4 1/2 5/8 2 7/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 20
STB2-625006SS Type 316 Stainless Steel 5/8 x 5 5/8 2 15/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 20
STB2-626006SS Type 316 Stainless Steel 5/8 x 6 5/8 3 15/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 20
STB2-627006SS Type 316 Stainless Steel 5/8 x 7 5/8 4 15/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 20
STB2-628126SS Type 316 Stainless Steel 5/8 x 8 1/2 5/8 6 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 20
STB2-754346SSR10 Type 316 Stainless Steel 3/4 x 4 3/4 3/4 2 1/2 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 10
STB2-755126SS Type 316 Stainless Steel 3/4 x 5 1/2 3/4 3 3/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 10
STB2-756146SS Type 316 Stainless Steel 3/4 x 6 1/4 3/4 3 15/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 10
STB2-757006SS Type 316 Stainless Steel 3/4 x 7 3/4 4 11/16 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 10
STB2-758126SS Type 316 Stainless Steel 3/4 x 8 1/2 3/4 6 Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel 10

Product Information Tables

Strong-Bolt® 2 Anchor Product Data
Size (in.) Carbon Steel Model No. Type 304 Stainless Steel Model No. Type 316 Stainless Steel Model No. Drill Bit Dia. (in.) Thread Length (in.) Quantity
Box Carton
1/4 x 1 3/4 STB2-25134 STB2-251344SS STB2-251346SS 1/4 15/16 100 500
1/4 x 2 1/4 STB2-25214 STB2-252144SS STB2-252146SS 1/4 1 7/16 100 500
1/4 x 3 1/4 STB2-25314 STB2-253144SS STB2-253146SS 1/4 2 7/16 100 500
3/8 x 2 3/4 STB2-37234 STB2-372344SS STB2-372346SS 3/8 1 5/16 50 250
3/8 x 3 STB2-37300 STB2-373004SS STB2-373006SS 3/8 1 9/16 50 250
3/8 x 3 1/2 STB2-37312 STB2-373124SS STB2-373126SS 3/8 2 1/16 50 250
3/8 x 3 3/4 STB2-37334 STB2-373344SS STB2-373346SS 3/8 2 5/16 50 250
3/8 x 5 STB2-37500 STB2-375004SS STB2-375006SS 3/8 3 9/16 50 200
3/8 x 7 STB2-37700 STB2-377004SS STB2-377006SS 3/8 5 9/16 50 200
1/2 x 3 3/4 STB2-50334 STB2-503344SS STB2-503346SS 1/2 2 1/16 25 125
1/2 x 4 1/4 STB2-50414 STB2-504144SS STB2-504146SS 1/2 2 9/16 25 100
1/2 x 4 3/4 STB2-50434 STB2-504344SS STB2-504346SS 1/2 3 1/16 25 100
1/2 x 5 1/2 STB2-50512 STB2-505124SS STB2-505126SS 1/2 3 13/16 25 100
1/2 x 7 STB2-50700 STB2-507004SS STB2-507006SS 1/2 5 5/16 25 100
1/2 x 8 1/2 STB2-50812 STB2-508124SS STB2-508126SS 1/2 6 25 50
1/2 x 10 STB2-50100 STB2-501004SS STB2-501006SS 1/2 6 25 50
5/8 x 4 1/2 STB2-62412 STB2-624124SS STB2-624126SS 5/8 2 7/16 20 80
5/8 x 5 STB2-62500 STB2-625004SS STB2-625006SS 5/8 2 15/16 20 80
5/8 x 6 STB2-62600 STB2-626004SS STB2-626006SS 5/8 3 15/16 20 80
5/8 x 7 STB2-62700 STB2-627004SS STB2-627006SS 5/8 4 15/16 20 80
5/8 x 8 1/2 STB2-62812 STB2-628124SS STB2-628126SS 5/8 6 20 40
5/8 x 10 STB2-62100 STB2-621004SS STB2-621006SS 5/8 6 10 20
3/4 x 5 1/2 STB2-75512 STB2-755124SS STB2-755126SS 3/4 3 3/16 10 40
3/4 x 6 1/4 STB2-75614 STB2-756144SS STB2-756146SS 3/4 3 15/16 10 40
3/4 x 7 STB2-75700 STB2-757004SS STB2-757006SS 3/4 4 11/16 10 40
3/4 x 8 1/2 STB2-75812 STB2-758124SS STB2-758126SS 3/4 6 10 20
3/4 x 10 STB2-75100 — — 3/4 6 10 20
1 x 7 STB2-100700 — — 1 3 1/2 5 20
1 x 10 STB2-1001000 — — 1 3 1/2 5 10
1 x 13 STB2-1001300 — — 1 3 1/2 5 10
Design requirements, dimensional data and installation information published in the C-A-2016 Simpson Strong-Tie Anchoring and Fastening Systems catalog for the Type 316 stainless-steel Strong-Bolt 2 wedge anchor applies to the Type 304 stainless-steel Strong-Bolt 2 wedge anchor for all diameters with the exception that the installation torque for the 1/2" stainless-steel Strong-Bolt 2 wedge anchor is 65 ft.-lb.
Material Specifications
Anchor Body Nut Washer Clip
Carbon Steel1 Carbon Steel, ASTM A 563, Grade A Carbon Steel ASTM F844 Carbon Steel ASTM A 568
Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel Type 304 Stainless Steel or Type 316 Stainless Steel
Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel Type 316 Stainless Steel
1. Zinc meets ASTM B 633, Class SC 1 (Fe / Zn 5), Type III.
Strong-Bolt® 2 Anchor Installation Data
Strong-Bolt 2 Dia. (in.) 1/4 3/8 1/2 5/8 3/4 1
Drill Bit Size (in.) 1/4 3/8 1/2 5/8 3/4 1
Min. Fixture Hole (in.) 5/16 7/16 9/16 11/16 7/8 1 1/8
Wrench Size (in.) 7/16 9/16 3/4 15/16 1 1/8 1 1/2

Length Identification Head Marks on Strong-Bolt® 2 Wedge Anchors (corresponds to length of anchor – inches)

Mark Units A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
From in. 1 1/2 2 2 1/2 3 3 1/2 4 4 1/2 5 5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 11 12 13 14 15 16 17 18
Up To But Not Including in. 2 2 1/2 3 3 1/2 4 4 1/2 5 5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 9 9 1/2 10 11 12 13 14 15 16 17 18 19

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products

Strong-Bolt® 2
Strong-Bolt® 2
Wedge Anchor
Strong-Bolt® 2
Strong-Bolt® 2
Wedge Anchor — Mechanically Galvanized
Sleeve-All®
Sleeve-All®
Sleeve Anchor
Easy-Set
Easy-Set
Pin-Drive Expansion Anchor
Anchor Designer™ for Concrete
Anchor Designer™ for Concrete
ADC