HHUS Extra-Heavy U-Shaped Hanger with Double-Shear Nailing
Face-Mount Hangers for Engineered Wood
This product's information may differ depending on the category of use. You are currently viewing details related to Face-Mount Hangers for Engineered Wood. You can also view product information related to the categories of: Face-Mount Hangers for Solid Sawn Lumber, Face-Mount Hangers for Plated Truss
Product Details
The HHUS is designed for applications where higher loads are needed. This heavy-capacity hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.
Key Features
- Can be installed after the beam is secured in place
- Value-engineered hanger designed to carry high loads at an economical price
- HHUS-series hangers are tested, load rated and code compliant
Material
- 14 gauge
Finish
- Galvanized. Some products available in HDG or ZMAX® coating. See Corrosion Information.
Installation
- Use all specified fasteners; see General Notes.
- Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
- Not designed for welded or nailer applications.
- Do not use double-shear hangers with I-joists.
- With 3x carrying members: when 0.162" x 3 1/2" nails are specified, use 0.162" x 2 1/2" nails into the header and 0.162" x 3 1/2" nails into the joist with no load reduction. When 0.148" x 3" nails are specified, use 0.148" x 2 1/2" nails into the header and 0.148" x 3" nails into the joist with no load reduction.
- With 2x carrying members: when 0.162" x 3 1/2" nails are specified, use 0.148" x 1 1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.64 of the table values. When 0.148" x 3" nails are specified, use 0.148" x 1 1/2" nails into the header and 0.148" x 3" nails into the joist and reduce the load to 0.77 of the table values. See Fastener Design Information.
Related Literature
Product Information Table
| Model No. | Ga. | W (in.) | H (in.) | B (in.) | Coating/Material | Packaging Qty. |
|---|---|---|---|---|---|---|
| HHUS210-2 | 14 | 3 5/16 | 9 3/16 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS210-2HDG | 14 | 3 5/16 | 9 3/16 | 3 | Hot-Dip Galvanized | 1 |
| HHUS210-2Z | 14 | 3 5/16 | 9 3/16 | 3 | ZMAX® | 1 |
| HHUS210-3 | 14 | 4 11/16 | 8 7/8 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS210-3HDG | 14 | 4 11/16 | 8 7/8 | 3 | Hot-Dip Galvanized | 1 |
| HHUS210-4 | 14 | 6 1/8 | 8 7/8 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS210-4HDG | 14 | 6 1/8 | 8 7/8 | 3 | Hot-Dip Galvanized | 1 |
| HHUS26-2 | 14 | 3 5/16 | 5 3/8 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS26-2Z | 14 | 3 5/16 | 5 3/8 | 3 | ZMAX® | 1 |
| HHUS28-2 | 14 | 3 5/16 | 7 1/4 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS28-2Z | 14 | 3 5/16 | 7 1/4 | 3 | ZMAX® | 1 |
| HHUS410 | 14 | 3 5/8 | 9 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS410HDG | 14 | 3 5/8 | 9 | 3 | Hot-Dip Galvanized | 1 |
| HHUS410Z | 14 | 3 5/8 | 9 | 3 | ZMAX® | 1 |
| HHUS46 | 14 | 3 5/8 | 5 1/8 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS46HDG | 14 | 3 5/8 | 5 1/8 | 3 | Hot-Dip Galvanized | 1 |
| HHUS46Z | 14 | 3 5/8 | 5 1/8 | 3 | ZMAX® | 1 |
| HHUS48 | 14 | 3 5/8 | 7 1/8 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS48Z | 14 | 3 5/8 | 7 1/8 | 3 | ZMAX® | 1 |
| HHUS5.50/10 | 14 | 5 1/2 | 9 | 3 | Zinc Galvanized, G90 | 1 |
| HHUS5.50/10HDG | 14 | 5 1/2 | 9 | 3 | Hot-Dip Galvanized | 1 |
| HHUS7.25/10 | 14 | 7 1/4 | 9 | 3 5/16 | Zinc Galvanized, G90 | 1 |
| HHUS7.25/10HDG | 14 | 7 1/4 | 9 | 3 5/16 | Hot-Dip Galvanized | 1 |
Load Tables
- Face-Mount Hangers – Solid Sawn Lumber (DF / SP) Tables
- Face-Mount Hangers – Solid Sawn Lumber (SPF / HF) Tables
HHUS — Sloped and/or Skewed Seat
HHUS hangers can be skewed left or right and/or sloped up or down to a maximum of 45°. Allowable loads are Table Load loads multiplied by the following reduction factors:
Load Reductions
| HHUS Seat Width | Carried Member End Condition | |||||
|---|---|---|---|---|---|---|
| Skewed Only Square Cut |
Skewed Only Bevel Cut |
Sloped or Sloped & Skewed Bevel Cut |
||||
| Uplift | Download | Uplift | Download | Uplift | Download | |
| All Widths | not allowed | not allowed | 0.72 | 0.85 | 0.72 (2,475 lb. max.) | 0.65 |
Top View HHUS Hanger Skewed Right
(joist must be bevel cut)
(joist must be bevel cut)
Load Values with Strong-Drive® SD Connector Screws
| Model No. | Fasteners | DF/SP Allowable Loads (lbs) | SPF/HF Allowable Loads (lbs) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Joist | Face | Uplift (160) | Floor (100) | Snow (115) | Roof (125) | Uplift (160) | Floor (100) | Snow (115) | Roof (125) | ||||
| HHUS26-2 | (6) SD10212 | (14) SD10212 | 1300 | 3660 | 4010 | 4010 | 1120 | 2815 | 3240 | 3445 | |||
| HHUS28-2 | (8) SD10212 | (22) SD10212 | 2065 | 4370 | 4370 | 4370 | 1775 | 3760 | 3760 | 3760 | |||
| HHUS210-2 | (10) SD10212 | (30) SD10212 | 2825 | 4735 | 4735 | 4735 | 2430 | 4070 | 4070 | 4070 | |||
| HHUS210-3 | (10) SD10212 | (30) SD10212 | 2825 | 4735 | 4735 | 4735 | 2430 | 4070 | 4070 | 4070 | |||
| HHUS210-4 | (10) SD10212 | (30) SD10212 | 2825 | 4735 | 4735 | 4735 | 2430 | 4070 | 4070 | 4070 | |||
| HHUS46 | (6) SD10212 | (14) SD10212 | 1300 | 3660 | 4010 | 4010 | 1120 | 2815 | 3240 | 3445 | |||
| HHUS48 | (8) SD10212 | (22) SD10212 | 2065 | 4370 | 4370 | 4370 | 1775 | 3760 | 3760 | 3760 | |||
| HHUS410 | (10) SD10212 | (30) SD10212 | 2825 | 4735 | 4735 | 4735 | 2430 | 4070 | 4070 | 4070 | |||
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
