Strong-Wall® Anchor Bolt Stabilizer
Steel Strong-Wall® Anchorage
This product's information may differ depending on the category of use. You are currently viewing details related to Steel Strong-Wall® Anchorage. You can also view product information related to the category: Lateral Systems for Cold-Formed Steel Construction
Product Details
The Strong-Wall anchor bolt stabilizer helps eliminate movement of anchor bolts during concrete placement. This stabilizer enables the Steel Strong-Wall (SSW) anchorage to be installed without being tied to the footing rebar cage. These anchor bolt stabilizers are designed to work in pairs and are suitable for use with all anchor template models.
Key Features
- Used with SSWTEL extended leg template, allows for placement of the SSW flush to the inside face of 2x6 framed exterior walls
- Different widths match SSWT anchor bolt templates
- Holes to accommodate 1/2"-diameter dowels (not supplied) for stabilization
Applications
- Seismic (new construction); seismic retrofit; anchorage solutions; shearwalls; wood/residential construction
Product Includes
- Single anchor bolt stabilizer
Material
- 14 gauge
Finish
- Galvanized (G90)
Installation
- Use two bolt stabilizers for each SSW anchor assembly; one at the embedded plate washer and the other above the template
- Drive 1/2"-diameter dowels (not supplied) down through the bolt stabilizers and into the ground to ensure plumb installation of the anchors and prevent movement during concrete placement
- Immediately following concrete placement, remove the dowels for reuse in other locations
Related Literature
Product Information Table
| Model No. | Wall Model | Ga. | Packaging Qty. |
|---|---|---|---|
|
Footnotes
|
|||
| SSWBS12 | SSW12 (12" width) | 14 | 1 |
| SSWBS15 | SSW15 (15" width) | 14 | 1 |
| SSWBS18 | SSW18 (18" width) | 14 | 1 |
| SSWBS21 | SSW21 (21" width) | 14 | 1 |
| SSWBS24 | SSW24 (24" width) | 14 | 1 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
