×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Deck-Drive™ DSV WOOD Screw 

Fasteners for the Timber Drive™ System

This product's information may differ depending on the category of use. You are currently viewing details related to Fasteners for the Timber Drive™ System. You can also view product information related to the category: Deck-Drive™ Exterior Wood Screws

Now also available in Black Quik Guard® coating.

The Deck-Drive DSV Wood screw is a powerful, load-rated fastening solution for preservative-treated decking applications. With its underhead nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today’s wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with wood decking products. The DSV Wood screw has a Quik Guard corrosion-resistant coating that comes in tan, red and black colors to match your wood and to accentuate your project's aesthetics! Available in hand-drive and in collated strips for use in our Quik Drive® auto-feed screw driving system, DSV screws are also offered in a variety of sizes to fasten fascia and trim.

Key Features

  • #10 DSV Wood screws are load rated for shear, pull-through and withdrawal resistance
  • Low-torque threads allow up to 35% more screws to be driven on a battery charge
  • Rimmed flat head with nibs countersinks easily and provides a clean, finished appearance
  • High-low tip threads with Type-17 point provides fast starts
  • Optimized threads for dimensional lumber
  • Quik Guard® coating provides corrosion resistance for exterior and certain preservative-treated wood applications as described by ICC-ES AC257, exposure conditions 1 and 3
  • Color blends with wood decking
  • T25 6-lobe driver bit included (replacement driver bit — BIT25T-2-R2)

Applications

  • Preservative-treated decking, exterior wood and engineered wood applications

Related Links

Catalog Pages

Related Literature

Connectors, Fasteners & Anchors for Mass Timber Construction
C-C-MASSTIMBER24
A catalog featuring connectors, fasteners and anchors for mass timber and CLT construction solutions.
Catalog
Fastening Systems Catalog
C-F-2023
A catalog including new product information as well as any applicable specification and installation instructions for Simpson Strong-Tie® fasteners and Quik Drive® systems.
Catalog
Fastening Systems Technical Guide
C-F-2023TECHSUP
A technical document featuring engineering information for structural fasteners featured in the C-F-2023 Fastening Systems Catalog.
Catalog
Guía técnica de los sistemas de sujeción
C-F-2023TECHSP
Un documento técnico información de ingeniería para los sujetadores estructurales que se incluyen en el C-F-2019SP Catálogo de sistemas de sujeción.
Catalog
Sistemas de sujeción
C-F-2023SP
Catálogo que incluye información sobre productos nuevos y las instrucciones de instalación y especificaciones correspondientes para los sujetadores Simpson Strong-Tie® y los sistemas Quik Drive®.
Catalog
Fastening Systems Technical Supplement for Canada
C-F-2017CANADD
A technical information addendum for Simpson Strong-Tie Fasteners in Canada.
Catalog
Deck Connection and Fastening Guide
F-DECKCODE22
A guide to deck building and for retrofitting safer, longer-lasting outdoor decks, with 2018 and 2021 IRC/IBC code-compliant solutions for using the latest anchors, connectors and fasteners.
Product Guide
Deck-Drive™ DSV WOOD Screw — Drive up to 35% More Screws per Battery Charge
F-F-DSV24
A flier providing product and installation information for the Deck-Drive™ DSV Wood screw.
Flier
Strong-Tie DIY - Projects for a strong and beautiful home
S-HOMEPRJCTS18
A booklet featuring practical and attractive DIY projects for home and yard using Simpson Strong-Tie® connectors and fasteners, including Outdoor Accents®.
Flier
Strong-Tie DIY - Proyectos para una casa resistente y hermosa
S-HOMPRJCTS18SP
Un catálogo con proyectos prácticos y atractivos DIY para el hogar y el patio que utilizan conectores y sujetadores Simpson Strong-Tie® y accesorios Outdoor Accents®.
Flier
Do More with a Total Crating Solution
S-O-CRATE23
A sales flier promoting Simpson Strong-Tie crating performance solutions and product offerings.
Flier
Timber Drive Compatible Fasteners
S-F-e14SOTDCF24
A sales flier showing a list of screw families that are compatible with the Timber Drive system, along with their model numbers and motors and drive system Upper/Lower Length settings.
Flier
Connection Solutions to Meet the DCA6 Prescriptive Residential Wood Deck Construction Guide
T-C-DCA6DECK21
A technical bulletin providing Simpson Strong-Tie connector, fastener and anchor solutions to meet the DCA6 provisions of the 2015 IRC for single-level, residential wood decks.
Technical Bulletin
Guard Post, Guard Rail and Baluster Installations Using Strong-Drive® Structural Fasteners
T-F-GRDPSTRL23
A technical bulletin providing information on how guard posts, rails and balusters are installed using fasteners.
Technical Bulletin

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Coating/Material Screw Size Length (in.) Head Diameter (in.) Drive Type Head Type Thread Type Point Type Color Approx. Count per Lb. Packaging Qty.
DSVBK158R160 Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Black 159 160
DSVBK158R480 Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Black 159 480
DSVBK212R240 Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Black 91 240
DSVBK212R80 Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Black 91 80
DSVBK3R210 Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Black 76 210
DSVBK3R70 Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Black 76 70
DSVR114MB Quik Guard® Coating #8 1 1/4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 194 1750
DSVR114R1LB Quik Guard® Coating #8 1 1/4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 194 1 lb.
DSVR114R350 Quik Guard® Coating #8 1 1/4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 194 350
DSVR114R5LB Quik Guard® Coating #8 1 1/4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 194 5 lb.
DSVR158MB Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 159 1750
DSVR158R1LB Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 159 1 lb.
DSVR158R350 Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 159 350
DSVR158R5LB Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 159 5 lb.
DSVR212MB Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 91 1750
DSVR212R1LB Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 91 1 lb.
DSVR212R350 Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 91 350
DSVR212R5LB Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 91 5 lb.
DSVR2MB Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 113 1750
DSVR2R1LB Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 113 1 lb.
DSVR2R350 Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 113 350
DSVR2R5LB Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 113 5 lb.
DSVR312MB Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 66 1000
DSVR312R1LB Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 66 1 lb.
DSVR312R350 Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 66 350
DSVR312R5LB Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 66 5 lb.
DSVR3MB Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 76 1750
DSVR3R1LB Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 76 1 lb.
DSVR3R350 Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 76 350
DSVR3R5LB Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 76 5 lb.
DSVR4MB Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 59 1000
DSVR4R1LB Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 59 1 lb.
DSVR4R350 Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 59 350
DSVR4R5LB Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Red 59 5 lb.
DSVT114MB Quik Guard® Coating #8 1 1/4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 194 1750
DSVT114R1LB Quik Guard® Coating #8 1 1/4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 194 1 lb.
DSVT114R350 Quik Guard® Coating #8 1 1/4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 194 350
DSVT114R5LB Quik Guard® Coating #8 1 1/4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 194 5 lb.
DSVT158MB Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 159 1750
DSVT158R160 Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 159 160
DSVT158R1LB Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 159 1 lb.
DSVT158R350 Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 159 350
DSVT158R5LB Quik Guard® Coating #8 1 5/8 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 159 5 lb.
DSVT212MB Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 91 1750
DSVT212R1LB Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 91 1 lb.
DSVT212R240 Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 91 240
DSVT212R350 Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 91 350
DSVT212R5LB Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 91 5 lb.
DSVT212R80 Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 91 80
DSVT212R880 Quik Guard® Coating #10 2 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 91 880
DSVT2MB Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 113 1750
DSVT2R110 Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 113 110
DSVT2R1LB Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 113 1 lb.
DSVT2R330 Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 113 330
DSVT2R350 Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 113 350
DSVT2R5LB Quik Guard® Coating #10 2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 113 5 lb.
DSVT312MB Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 66 1000
DSVT312R1LB Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 66 1 lb.
DSVT312R350 Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 66 350
DSVT312R5LB Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 66 5 lb.
DSVT312R60 Quik Guard® Coating #10 3 1/2 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 66 60
DSVT3MB Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 76 1750
DSVT3R1LB Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 76 1 lb.
DSVT3R210 Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 76 210
DSVT3R350 Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 76 350
DSVT3R5LB Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 76 5 lb.
DSVT3R70 Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 76 70
DSVT3R770 Quik Guard® Coating #10 3 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 76 770
DSVT4MB Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 59 1000
DSVT4R1LB Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 59 1 lb.
DSVT4R350 Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 59 350
DSVT4R50 Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 59 50
DSVT4R5LB Quik Guard® Coating #10 4 0.330 T25 6-Lobe Rimmed Flat Head with Nibs Variable Thread Design High-Low Threaded Point Tan 59 5 lb.

Product Information Table

Model No. Length (in.) Screw Size Drive Type Head Type Thread Type Coating/Material Color Appx Count Per Lb Packaging Quantity UPC
DSVR114MB 1 1/4 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 194 1750 707392975663
DSVR114R1LB 1 1/4 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 194 1 lb. 707392525615
DSVR114R350 1 1/4 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 194 350 707392816362
DSVR114R5LB 1 1/4 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 194 5 lb. 707392152682
DSVR158MB 1 5/8 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 159 1750 707392841296
DSVR158R1LB 1 5/8 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 159 1 lb. 707392154235
DSVR158R350 1 5/8 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 159 350 707392306641
DSVR158R5LB 1 5/8 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 159 5 lb. 707392416937
DSVR212MB 2 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 91 1750 707392195498
DSVR212R1LB 2 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 91 1 lb. 707392903468
DSVR212R350 2 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 91 350 707392820789
DSVR212R5LB 2 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 91 5 lb. 707392533733
DSVR2MB 2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 113 1750 707392173779
DSVR2R1LB 2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 113 1 lb. 707392106142
DSVR2R350 2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 113 350 707392323372
DSVR2R5LB 2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 113 5 lb. 707392339946
DSVR312MB 3 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 66 1000 707392227755
DSVR312R1LB 3 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 66 1 lb. 707392439240
DSVR312R350 3 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 66 350 707392249979
DSVR312R5LB 3 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 66 5 lb. 707392683544
DSVR3MB 3 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 76 1750 707392791126
DSVR3R1LB 3 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 76 1 lb. 707392233763
DSVR3R350 3 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 76 350 707392515944
DSVR3R5LB 3 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 76 5 lb. 707392391548
DSVR4MB 4 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 59 1000 707392956532
DSVR4R1LB 4 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 59 1 lb 707392480051
DSVR4R350 4 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 59 350 707392285281
DSVR4R5LB 4 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Red 59 5 lb. 707392139621
DSVT114MB 1 1/4 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 194 1750 744039105809
DSVT114R1LB 1 1/4 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 194 1 lb. 744039137107
DSVT114R350 1 1/4 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 194 350 ct. 744039132720
DSVT114R5LB 1 1/4 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 194 5 lb. 744039200405
DSVT158MB 1 5/8 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 159 1750 744039640102
DSVT158R1LB 1 5/8 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 159 1 lb. 744039145607
DSVT158R350 1 5/8 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 159 350 ct. 744039112708
DSVT158R5LB 1 5/8 #8 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 159 5 lb. 744039668809
DSVT212MB 2 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 91 1750 744039126705
DSVT212R1LB 2 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 91 1 lb. 744039130207
DSVT212R350 2 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 91 350 ct. 744039897209
DSVT212R5LB 2 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 91 5 lb. 744039141401
DSVT2MB 2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 113 1750 744039406500
DSVT2R1LB 2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 113 1 lb. 744039161508
DSVT2R350 2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 113 350 ct. 744039797707
DSVT2R5LB 2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 113 5 lb. 744039619702
DSVT312MB 3 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 66 1000 707392452348
DSVT312R1LB 3 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 66 1 lb. 744039941902
DSVT312R350 3 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 66 350 ct. 744039640188
DSVT312R5LB 3 1/2 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 66 5 lb. 744039601301
DSVT3MB 3 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 76 1750 744039159505
DSVT3R1LB 3 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 76 1 lb. 744039174508
DSVT3R350 3 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 76 350 ct. 744039142705
DSVT3R5LB 3 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 76 5 lb. 744039170104
DSVT4MB 4 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 59 1000 707392997061
DSVT4R1LB 4 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 59 1 lb. 744039121601
DSVT4R350 4 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 59 350 ct. 707392874522
DSVT4R5LB 4 #10 T-25 6-Lobe Ribbed Flat Head Variable Thread Design Quik Guard® Coating Tan 59 5 lb. 744039374601
    These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated woods. For applications in higher-exposure applications, consider type-300 series stainless-steel fasteners for superior corrosion resistance. See additional important information before selecting a fastener for a specific application.

Load Tables

DSV Wood Screw — Allowable Shear Loads

Allowable Shear Loads
  1. Allowable loads are based on full penetration into the main member. Full penetration is the screw length minus the side member thickness.
  2. Allowable loads are shown at the wood load duration factor of CD = 1.0. Loads may be increased for load duration per the building code up to a CD = 1.6. Tabulated values must be multiplied by all applicable adjustment factors per the NDS. For in-service moisture content greater than 19%, use CM = 0.62.
  3. Loads are based on installation into the side grain of the wood with the screw axis perpendicular to the face of the member.
  4. Loads are based on tests of connections made with same species as main and side members. For connections with mixed species, use the loads for the species with the lower specific gravity.
  5. Engineered wood must have a minimum modulus of elasticity grade of 0.80E and have a minimum equivalent specific gravity at least 0.50 to use the DFL/SP values or 0.42 to use the SPF/HF values.

Allowable Withdrawal and Pull-Through Loads

Allowable Withdrawal and Pull-Through Loads
  1. The tabulated Reference Allowable Withdrawal design value, W, is in pounds per inch of the thread penetration into the side grain of the main member.
  2. The tabulated Reference Maximum Withdrawal design value, Wmax, is in pounds where the entire end thread length is embedded into the side grain of the main member.
  3. Reference withdrawal design values, W and Wmax, are shown at CD = 1.0. Loads may be increased for load duration per the building code up to CD = 1.6. Tabulated values must be multiplied by all applicable adjustment factors from the NDS. For in-service moisture content greater than 19%, use CM = 0.70.
  4. Embedded thread length is that portion of the end threads in the main member including the screw tip.
  5. Reference Pull-Through values are based on pull-through of a 1 1/2"-thick side member.
  6. Engineered wood must have a minimum modulus of elasticity grade of 1.55E and a minimum equivalent main member in specific at least 0.50 to use the DFL/SP values or 0.42 to use the SPF/HF values.

Connection Geometry

Connection Geometry
  1. Edge distances, end distances, and spacing of the screws must be sufficient to prevent splitting of the wood, or as required by this table, or when applicable as recommended by the structural composite lumber manufacturer, whichever is the most restrictive.
  2. Allowable shear loads shall be multiplied by the applicable tabulated reduction factors when used in the corresponding geometry.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products

Finish Trim Screw
Finish Trim Screw
Timber Drive™ Structural Screw Fastening System
Timber Drive™ Structural Screw Fastening System